Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mountain View, CA
Chimney repair in Mountain View usually means working on 1950s and 1960s chimneys that have been ignored for decades. Clay tile liners crack, crowns erode, and flashing separates where the chimney meets the roof. We handle the inspection, the diagnosis, and the repair ourselves, and because we also sweep and service dryer vents, one call covers the whole venting system. Reach us at (866) 596-8327 for a repair estimate or a full inspection.
Why Mountain View Homes Are Different
The single-family homes around Waverly Park, Gemello, and Monta Loma were mostly built between 1950 and 1975. A lot of those are Eichler-style post-and-beam construction with original open-hearth fireboxes. The fireboxes in those homes are often prefab metal units with shallow smoke shelves, and they were never really designed for heavy burning. What we find in Mountain View, year after year, is creosote packed into those shallow pockets behind the damper, plus clay tile liners that have cracked from decades of thermal cycling. The climate matters too. Wood burning here is occasional, concentrated into maybe a dozen winter evenings, so creosote builds slowly and gets ignored. Dry summers and the hills west of town make spark arrestor condition a real fire-safety issue well past fire season. Many homeowners in these Eichler tracts have never burned wood before, which means our job is often half inspection and half education about what their specific fireplace can safely handle.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mountain View Services
Most Mountain View homeowners call us first about two things: a chimney that has not been swept in years, and a dryer vent they have never thought about. Both are fire risks, and we handle both in one appointment.
Chimney Sweep in Mountain View
A chimney sweep in Mountain View typically involves removing creosote and soot from the flue, cleaning the smoke shelf and firebox, and checking the damper, crown, and spark arrestor. On older Eichler and ranch homes, we pay particular attention to the shallow smoke shelf, where debris collects faster than homeowners expect. If you want the full detail on sweep pricing, process, and what we check, see our dedicated Chimney Sweep in Mountain View page.
Dryer Vent Cleaning in Mountain View
Dryer vents in Mountain View homes, especially the 1960s and 1970s ranch houses with long interior vent runs, clog with lint faster than shorter exterior-wall setups. We remove the built-up lint, inspect the full run for kinks and foil-pipe problems, and confirm the termination damper opens properly. Your dryer vent is a fire risk too. Full details are on the Dryer Vent Cleaning in Mountain View page.
Chimney Repair in Mountain View
Chimney repair in Mountain View is most often about age. Homes built in the 1950s through 1970s have clay tile liners that crack with thermal stress and crowns that erode in dry summers and winter rains. The result is water intrusion, spalling brick, and a flue that is no longer safe to burn. Our Chimney Repair service covers everything from cap replacement to full liner installation, and because we diagnose with camera inspection, you see the problem before you approve the fix.
We work with the product lines that the trade actually uses on these older chimneys: Gelco for caps and crowns, Olympia Chimney for prefab and masonry components, and Copperfield for chase covers and flashings. That matters when the fix has to match a 60-year-old installation.
Chimney Cap Installation
Signs you need it
Water streaks on the firebox floor, rusted damper hardware, or an open flue that lets rain, birds, and debris straight down into the firebox.
What it costs in Mountain View
Chimney cap installation in Mountain View typically runs $180 to $420 for most standard stainless or galvanized caps, with custom sizing adding more.
How we do it
We measure the flue opening, match a Gelco or Olympia Chimney cap to the tile dimensions, secure it with the correct mechanical fastener, and verify the spark arrestor mesh is undamaged before we leave.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, peeling paint around the roofline penetration, or visible gaps where the metal flashing has pulled away from the brick or the roof deck.
What it costs in Mountain View
Chimney flashing repair in Mountain View generally falls between $300 and $850, depending on whether we are resealing existing flashing or cutting in new step flashing.
How we do it
We remove the old sealant, cut back failed step flashing if needed, install new Copperfield flashing or re-secure the existing pieces, and apply a polyurethane sealant rated for masonry-to-metal transitions.
What Chimney Repair Costs in Mountain View
| Item | Typical range in Mountain View |
|---|---|
| Chimney cap installation | $180 – $420 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $250 – $700 |
Those are the common repair line items for Mountain View’s housing stock. Full liner replacement runs higher because of the material and access work involved, and we always quote it as a separate line after camera inspection.
Do I really need chimney repairs, or can I keep using the fireplace?
If the flue liner is cracked or the crown is failing, you should not burn. A cracked liner exposes combustible framing to heat and gases, and water intrusion accelerates spalling. We show you the camera footage before recommending anything, so you are not taking our word on faith.
How long does chimney repair take in Mountain View?
Most cap installations and flashing repairs are done in a single visit of two to four hours. Crown work needs a day for forming and another for curing. Liner installation typically takes one full day. Call (866) 596-8327 and we will give you a straight timeline for your specific chimney.
Brands We Service in Mountain View
We stock and install parts from Gelco, Olympia Chimney, and Copperfield, and we keep common cap sizes and flashing components on the truck so a repair is not dragged out over two weeks while parts ship. That local stock is why we can often complete a cap or flashing repair in one visit. You can read more about the product lines on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Chimney sweep (standard, one flue) | $189 – $349 |
| Chimney sweep (two-story roof access) | $289 – $449 |
| Chimney cap installation | $180 – $420 |
| Chimney cap replacement | $220 – $475 |
| Chimney flashing repair | $300 – $850 |
| Chimney crown repair | $250 – $700 |
| Dryer vent cleaning (standard, up to 15 ft) | $129 – $229 |
| Dryer vent cleaning (extended or roof termination) | $189 – $329 |
In Mountain View, price gets pushed up primarily by roof pitch and access on two-story homes, and by how long the previous owner let the creosote or crown damage go. We agree on the flat price before we book the work, so the number on your estimate is the number on your invoice.
Neighborhoods We Serve in Mountain View
We work throughout Mountain View, from the Eichler tracts in Monta Loma and Waverly Park to the ranch homes in Gemello and the newer construction near downtown. The response time across the city is generally within one to two business days for non-emergency chimney work.
- Monta Loma
- Waverly Park
- Gemello
- Rex Manor
- Castro City
Service Area – Cities Near Mountain View
We also cover the neighboring cities where housing stock is similar and chimney issues repeat the same patterns. That includes Los Altos, CA, Sunnyvale, CA, Cupertino, CA, and Palo Alto, CA. If your home is in one of those cities, the same team and the same approach apply.
Serving Mountain View, CA – Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mountain View
Most non-emergency inspections and sweeps can be scheduled within one to two business days. Repair work depends on the scope and whether parts are already on the truck. Call (866) 596-8327 and we will give you a real date, not a vague window.
Most routine repair work, including cap replacement, flashing repair, and crown resurfacing, does not require a separate permit. If a full liner replacement requires structural modification, we will tell you before any work begins. We handle code-compliant installation as standard practice.
Yes, and we do it regularly. Eichler fireboxes are often prefab metal with shallow smoke shelves, and they need a sweep and inspection before any burning season. We also check whether the original damper is functional or needs replacement, which is common in those homes.
If your chimney or dryer vent has been sitting unchecked for years, call us at (866) 596-8327. We will inspect it, show you what we find, and quote a flat price before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Adam Hayes"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Beatriz Martinez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Dana Whitaker